LUBRICATING OIL HEATER WITH THERMOSTAT
PART NO. S-13A FOR SENTRY-PRO 7 THRU 12.5 KW, GEN-SETS WITH AIR COOLED ENGINES.
|
|
Lubricating oil heater with lubricating oil thermostat and 1" NPT threads. Used on small air cooled engines, for faster engine starts during the cold winter, by circulating warm oil into the cold engine.
- S-13A: 75 Watt, 120 VAC, 1.6 Amp, lube oil heater.
- The lub oil heater is a 75 Watt, 120 VAC cartridge heater.
- The lub oil thermostat regulates oil temperature to 60°F (ON), 80°F (OFF).
- The thermostat prevents the possibility of overheating lub oil, thus degrading or damaging the lub oil.
- Factory installed only.
|
|
|
INDUSTRIAL TANK / CIRCULATION ENGINE WATER HEATER
PART NO. S-13B FOR SENTRY-PRO 15 THRU 45 KW GEN-SETS WITH LIQUID COOLED ENGINES
PART NO. S-13C FOR SENTRY-PRO 60 THRU 130 KW GEN-SETS WITH LIQUID COOLED ENGINES |
|
Industrial tank/circulation engine heater offers dependable engine starts in all temperatures. By circulating warmed coolant through an engine, it assures a quick start, reduces time to reach operating speed and enhances immediate full-load acceptance.
- S-13B: 750 Watt, 120 VAC, 6.3 Amps (3305032) engine water heater with thermostat for 15 thru 45 KW generator sets, mounted and plumbed to engine.
- S-13C: 1000 Watt, 120 VAC, 8.3 Amps (3305044) engine water heater with thermostat for 60 thru 130 KW generator sets, mounted and plumbed to engine.
- Rugged die cast aluminum construction is corrosive and impact resistant.
- Low watt density copper heating element provides optimum performance.
- Temperature sensing thermostat provides over heat protection in regulated heat range of 80°F (ON), 100°F (OFF).
- Temperature and oil resistant with permanently connected 5 ft. cord and grounded male plug.
- Factory installed only.
|
Previous |
